|
Ethernet Temperature Data Logger
Place these data loggers throughout your facility and receive all data automatically at your PC.
No retrieving data from loggers. This is the easiest and most cost-effective way to
create a scalable monitoring network.
- Email and Text alerts available
- Eliminates the need to change charts and pens
- Data automatically downloaded to your computer wirelessly
- Loggers continue to log in the event of a power outage
These loggers, while wired, are compatible with the WiZARD2 monitoring system
and software. Use them in conjunction with your WiZARD2 system or without! They allow you
to monitor locations that would have previously been cost prohibitive to monitor wirelessly.
|
Specification
|
|
|
Alarm Type
|
High/Low, Low Battery, Calibration Due, Lost Communication
|
|
Ambient Operating RH Temperature Conditions
|
0-95% RH non-condensing (Logger only)
|
|
Approvals
|
RoHS, FCC Part 15 Compliance, CE
|
|
Ambient Operating Temperature Conditions
|
-22 to 122F (-30 to 50C)
|
|
Battery Backup
|
4 AA Batteries
|
|
Battery Life (Avg)
|
6 Months (at 2 Minute Sample Rate in Moderate Conditions)
|
|
Cable Details
|
USB - Male Series A plug to 5 pin Male Series B mini plug.
|
|
Channels
|
CH1: Temperature, CH2: Temperature
|
|
Calibration Options
|
N100 , N300, N400, & N520
|
|
Data Capacity
|
32,000 (16,000 per channel)
|
|
Dimensions
|
1.7 x 4.25 x 4.25in
|
|
Download Type
|
Wireless
|
|
Enclosure
|
Black; ABS Plastic Clam Shell
|
|
Included Accessories
|
USB Cable, AC Adapter, 4 AA Batteries, Quick Start Guide
|
|
Mounting Options
|
Free Standing or Wall Mount (With Keyhole)
|
|
Network Requirements
|
If Host PC and Logger are on separate subnets, both Logger and Host PC subnets must be able to see each other. For best results, assign a fixed IP Address to the Host PC. If preferred, logger can be setup using DHCP (contact Dickson Technical Support for
|
|
Note on Alarm Type
|
All alarm conditions will generate a pop-up notification in the Dickson WiZARD Software. Text/Email notification available with use of WiZARD SECURE Software.
|
|
Power Source
|
120 to 240 VAC, 12 VDC (INTL fittings available)
|
|
Power Source Input
|
AC 100-240 0.5V 60/50 Hz
|
|
Power Source Output
|
DC 9V, 1A
|
|
Power Status Indicator
|
Red/Green/Blue (RGB) LED
|
|
PC Requirements
|
Minimum of 1 GB RAM; Windows XP (with service pack 3), Vista and Windows 7; 2 available USB ports
|
|
Sample Interval
|
User Selectable (from 10 seconds to 1 hour in 10 second intervals)
|
|
Software Options
|
W2 Version 1.2.0.11 or higher
|
|
Storage Conditions
|
-22 to 158F (-30 to 70C)
|
|
Storage Conditions RH
|
0-95% RH non-condensing
|
|
Temperature Accuracy
|
+/-1.8F from -22 to 122F (+/-1C from -30 to 50C)
|
|
Unit Weight
|
3 lb
|
|
Warranty
|
12 Month Limited
|
Product added : May 07 2012 07:18:49 AM
|
 |
|
